BURKE® Adhesives

Burke
Adhesive
Recommended
Usage
Spread
Rate
Floor
Conditions
LEED
EQ 4.1
Qualified
VOC
Level
MSDS
BR-101 Any Burke or Mercer Wall Base

250 LF by trowel (4")

65 LF per cartridge (4")

Dry, non-porous surface free of paint, wallpaper Yes Negligible
(0 grams/liter)
BR-101 Acrylic
Wall Base Adhesive
BR-710 EcoFitness
EcoScore

75 SF per gallon

Dry, porous surface Yes < 12 grams/liter BR-710 One Part Polyurethane Adhesive
BR-711 Tile, Treads, Nosings, Risers, Stringer LVT

100 SF per gallon

Dry, porous surface above-grade; moisture-free wood or concrete Yes Negligible
(0 grams/liter)
Burke BR 711 Rubber and Vinyl Stair Tread and Tile Adhesive
BR-715 Tread Nosings

200 SF per gallon
50 LF per
via cartridge

Concrete, wood or non-galvanized metal steps Yes < 12 grams/liter Burke BR 715 Two-Part Epoxy Nose Filler Part A

Burke BR 715 Two-Part Epoxy Nose Filler Part B
BR-721
two part Solvent-Free
Tile, Treads, LVT

100 SF per gallon

Dry, porous or non-porous surfaces on, at or below grade. Solid strength & flexible bond for heavy foot & vehicle traffic. High water resistance to surface flooding. Yes < 12 grams/liter Burke BR 721 Two-Part Epoxy Tile Adhesive Part A

Burke BR 721 Two-Part Epoxy Tile Adhesive Part B
BR-725
two part
Tile, Treads, LVT

100 SF per gallon

Wherever BR-721 is used plus impact resistant Yes < 12 grams/liter Burke BR 725 Two-Part Polyurethane Tile Adhesive Part A

Burke BR 725 Two-Part Polyurethane Tile Adhesive Part B
Step-Bond
Adhesive Tape
Tape
Rubber and Vinyl Treads and Risers

6 inch by
164 LF

1 inch by
164 LF

Concrete, wood or non-galvanized metal steps Yes Negligible
(0 grams/liter)
Burke Step Bond Adhesive Tape
Acceptable moisture vapor transmission rate in concrete: 3 pounds per 1,000 sf in 24 hours via calcium chloride test method (ASTM-1869).

See Installation Instructions for complete information.

All Burke Adhesives listed above can qualify for LEED EQ Credit 4.1: Low-Emitting Materials: Adhesives & Sealants.
All of the Burke Flooring Adhesives listed above are in compliance with the requirements of SCAQMD Rule #1168.
Specific VOC levels for each adhesive is noted above.